Hawk brand front disc pads for my 02 accord SE sedan 4-cyl. have different thicknesses on different sites. I’m getting ready to replace my front rotors and pads for the first time on my own. The different thickness I find are .660 and .620. I think that’s 6.6 and 6.2 mm but both sites say it fits my exact car. If that’s the case, should I get the thicker one at the same price to last longer?

If you can’t get a set of 5MM type with metallic type of Brake Pads go with the thicker type this will just give you longer life of a pad. such as the 660 type.But it also has to do with the space between the caliper and rotor for space for them to fit on each side of the rotor.But overall there’s not much differences for both of them for you to use.They all wear down over time and use.A word for a tip to keep your rotors from warping is to use a torque wrench when you go to put your wheels back on and tighten them down also use the torque setting for the type of wheels you have this will keep the rotors from warping from heat and cold from each time you use the brakes and let them cool when your not using them from each stop.If your rotors are not worn down or have grooves in the and can be machined i would use them before going out and buying new ones.Just take them to a machine shop to have them checked for warping and to see if they can be used before you go buy new rotors.hgm20002000@yahoo.com

Where can I buy EBC or Hawk brake pads in Georgia. FYI- summit racing is out of stock. Thanks?